Tri Sunarsih (1), Hasan Marzuki (2), Novadri Anaser (3), Safaruddin Safaruddin (4)
Cement Grinding Aid (CGA) appears as an addition that has the potential to affect the characteristics of the mortar in PCC cement. The purpose of this study is to optimize the formulation of PCC cement from CGA-MBS and CGA-MAPEI types against the Setting Time and mortar compressive strength. In this study, a physical test method was used, namely the setting time and mortar compressive strength test. From the results of the study, the setting time test is faster for the CGA-MAPEI type because it increases the smoothness of the cement, while the CGA-MBS type has a chemical composition content that more affects its properties as a more stable and resistant adhesive. In the mortar compressive strength test, the addition of a dose of CGA (100 – 400) ppm the compressive strength value of CGA-MAPEI mortar is higher than that of GCA-MBS, but in the addition of a dose of 500 ppm, the compressive strength value of CGA-MAPEI is still below the compressive strength value of CGA-MBS.
Anggraini, L. E., & Sari, N. I. (2017). PERBANDINGAN PENENTUAN KADAR AIR CEMENT GRINDING AID DENGAN METODE GRAVIMETRI DAN FT-IR. In Laporan Praktik Kerja Lapangan (pp. 31-32). Depok: Fakultas MIPA Universitas Indonesia.
Anugerah Nan Agung, & Safaruddin. (2023). PERAWATAN PADA MESIN BELT BUCKET ELEVATOR 51BE45 DI PT SEMEN BATURAJA (PERSERO) TBK MELALUI HASIL VIBRASI. PARADIGM : Journal Of Multidisciplinary Research and Innovation, 1(02), 68–76. https://doi.org/10.62668/paradigm.v1i02.754
Artati, N. (2016). ANALISIS PENGARUH GRINDING AID HI 2822 N DAN 702 A TERHADAP KUALITAS SEMEN DI PT. HOLCIM INDONESIA Tbk. ITEKS (Intuisi Teknologi Dan Seni), VIII(1), 102-111.
Edo Prasetyo, Josua Sidauruk, & Safaruddin. (2023). ANALISIS KERJA GRATE COOLER PADA PROSES PRODUKSI SEMEN PADA PT SEMEN BATURAJA Tbk. PARADIGM : Journal Of Multidisciplinary Research and Innovation, 1(02), 85–93. https://doi.org/10.62668/paradigm.v1i02.757
Idwan, I., & Abdullah, R. (2022). PERENCANAAN TEBAL PERKERASAN LENTUR JALAN DENGAN METODE AASHTO 1993. PARADIGM : Journal Of Multidisciplinary Research and Innovation, 1(01), 36–45. https://doi.org/10.62668/paradigm.v1i01.376
Istighfar, I., Kurniawandy, A., & Ermiyati. (2014). ANALISA PERBANDINGAN KUAT TEKAN BETON SEMEN PCC DAN SEMEN TIPE 1 TERHADAP PEMAKAIAN SIKAMENT NN. Riau: Jurusan Teknik Sipil Fakultas Teknik Universitas Riau.
Josua Sidauruk, & Safaruddin. (2023). MENGHITUNG EFISIENSI TERMAL PADA ALAT VERTICAL CEMENT MILL PABRIK II PT SEMEN BATURAJA TBK. PARADIGM : Journal Of Multidisciplinary Research and Innovation, 1(02), 77–84. https://doi.org/10.62668/paradigm.v1i02.756
Lasino, Rachman, D., & Sugiharto, B. (2012). KAJIAN PENGGUNAAN SEMEN PORTLAN KOMPOSIT UNTUK BETON. Jurnal Teknologi Bahan dan Barang Teknik, II(2), 41-50.
Maghpiroh, A., Iskandar, D., anaser, N., & tohir, S. (2023). PENGARUH PENAMBAHAN FLY ASH TERHADAP KUALITAS SEMEN DI PT SEMEN BATURAJA. Tbk. DE FACTO : Journal Of International Multidisciplinary Science, 1(02), 96–110. https://doi.org/10.62668/defacto.v1i02.786
Mapei. (2008). GRINDING AIDS FOR HIGH PERFORMANCE CEMENTS. Milan: MAPEI Cement Additives Division.
Marsden, W. (2014). ANALISIS STRUKTUR, PERILAKU DAN KINERJA INDUSTRI SEMEN DI INDONESIA. In Skripsi (p. 1). Malang: FEBI Universitas Brawijaya.
Mawardi, Nofrita, R., & Kuniawaty, D. (2012). KARAKTERISTIK UJI BLAINE, KONSISTENSI NORMAL DAN WAKTU PENGIKATAN SEMEN YANG MENGGUNAKAN TANAH NAPA SEBAGAI BAHAN ADIKTIF. Chemistry Journal of State University of Padang, I(1), 35-37.
Mustaqim, A. (2014). PENGARUH PENGGUNAAN SEMEN PCC (PORTLAND COMPOSITE CEMENT) PADA FAS 0,4 TERHADAP LAJU PENINGKATAN MUTU BETON. Jurnal Scafolding FT Unnes, III(1).
Osyellah Indar Parawansya, & Safaruddin. (2023). VERIFIKASI METODE PENENTUAN KADAR SO3 TERHADAP WAKTU PENGENDAPAN DALAM SEMEN DI PT. SEMEN BATURAJA. DE FACTO : Journal Of International Multidisciplinary Science, 1(02), 111–119. https://doi.org/10.62668/defacto.v1i02.782
Pentachem. (2018). CEMENT GRINDING AIDS: CEMENT PERFORMANCE ENHANCER (CPE). Indonesia: Penta Chemicals Indonesia.
PT Semen Baturaja Tbk. (2020). INSTRUKSI KERJA, PENGUJIAN SEMEN. In A IK 211000-03 (pp. 40-43). PT Semen Baturaja.
PT. SEMEN BATURAJA Tbk. (2023). PROFIL PERUSAHAAN. (PT SEMEN BATURAJA Tbk) Retrieved 2023 8, 2023, from https://semenbaturaja.co.id/
Putri, F. A., Amri, H., & Suryani, L. (2020). RIVIEW INDUSTRI SEMEN. Padang: Fakultas MIPA Universitas Padang.
Rama Wijaya, Indah Purnamasari, Abraham Abimanyu Kristiyono Putro, & Safaruddin. (2023). EVALUASI KINERJA ALAT CALCINER DITINJAU DARI EFESIENSI THERMAL DAN EMISI GAS CO2 DI PABRIK II PT SEMEN BATURAJA Tbk. DE FACTO : Journal Of International Multidisciplinary Science, 1(02), 51–62. https://doi.org/10.62668/defacto.v1i02.476
Sari, D. S., & Sundari, S. (2020). PEMANFAATAN LIMBAH FLY ASH DARI PEMBAKARAN BATUBARA PADA PEMBUATAN SEMEN PCC (PORTLAND Composite Cement) di PT Semen XYZ Lampung. In Laporan Kerja Praktik (pp. 100-105). Bandar Lampung: Program Studi Teknik Industri Fakultas Teknik Universitas Tulang Bawang.
Tri Astika. (2023). ANALISIS KADAR LOGAM BERAT TIMBAL PADA GARAM KONSUMSI MENGGUNAKAN METODE SPEKTROFOTOMETRI SERAPAN ATOM (SSA). PARADIGM : Journal Of Multidisciplinary Research and Innovation, 1(02), 94–98. https://doi.org/10.62668/paradigm.v1i02.758
Ulliyah, M. R. . (2024). ANALISIS KANDUNGAN LOGAM HG (MERCURY) PADA AIR SUNGAI MENGGUNAKAN METODE SPEKTROFOTOMETRI SERAPAN ATOM (SSA). DE FACTO : Journal Of International Multidisciplinary Science, 2(1), 01–10. https://doi.org/10.62668/defacto.v2i1.1021
Yanita, R. (2020). SEMEN PCC SEBAGAI MATERIAL GREEN CONSTRUCTION DAN KINERJA BETON YANG DIHASILKAN. Jurnal Sains dan Teknologi, XIX(1), 13-18.
Yusuf, Y., Zuki, Z., & Refnita, G. (2013). PENGARUH PENAMBAHAN ABU TERBANG (FLY ASH) TERHADAP KUAT TEKAN MORTAR SEMEN TIPE PCC SERTA ANALISIS AIR LAUT YANG DIGUNAKAN UNTUK PERENDAMAN. Prosiding Semirata FMIPA Universitas Lampung. Padang.